CuSO_4溶液中Cu元素浓度的激光诱导击穿光谱测量研究

利用激光诱导击穿光谱技术对CuSO4溶液中的Cu元素浓度进行实验测量。利用配置的七种浓度的CuSO4溶液,采用统计探索性数据分析方法给出了Cu元素定标曲线,其拟合度系数R2大于0.98,激光诱导击穿光谱的平均相对偏差值为6.9%,Cu元素的平均最小检测限为12ppm。利用去一交互检验方法采用分析谱线CuⅠ324.75nm和CuⅠ327.40nm对应的七种溶液的平均测量相对误差分别为6.52%和5.86%。当Cu元素浓度在10ppm时实验相对误差较大,其值为10.3%,而浓度达到2 000ppm时相对误差值减小,仅为1.1%,说明LIBS技术在溶液较低元素浓度检测方面的准确度有待提高。研究结果表明激光诱导击穿光谱技术在环境水污染重金属元素检测方面具有潜在的应用前景。     

基于水声信道传播时延排序的分层空时信号检测

基于分层空时编码的多输入多输出技术是一种极具潜力的高速水声通信技术, 但要实现这种潜力需要复杂的空时信号处理方法, 以抵消来自水声信道的多径干扰和异步到达干扰, 以及叠加在接收端的各层信号之间的干扰. 对低复杂度的空时信号处理方案进行了研究, 提出了一种基于子信道传播时延排序的有序连续干扰抵消信号检测算法, 利用子信道间的传播时延差, 实现可使差错概率最小的最佳检测排序; 给出了利用信道估计, 以极低的计算量确定排序的方法, 从而可以大幅降低信号检测的计算复杂度. 采用低复杂度的单载波频域均衡来抵消水声信道中的码间干扰和异步到达干扰. 仿真结果表明, 基于时延排序的信号处理算法可以获得检测性能的改善, 而且性能增益在高数据率时更加显著. 研究结果表明, 采用有效的信号处理方法可使水声信道中造成信号检测干扰的传播时延成为改善系统性能的有利因素.     

具有Washer型输入线圈的超导量子干涉放大器的制备与表征

超导量子干涉仪(SQUID)放大器具有低输入阻抗、低噪声、低功耗等优点, 目前被广泛用于微弱信号的检测领域. 与其他工艺相比, Nb/Al-AlO_x/Nb结构的约瑟夫森结具有相对较高的转变温度(T_c)、高的磁通电压调制系数以及良好的热循环能力、较宽的临界电流范围, 因此是制备SQUID放大器的很好选择. 设计并制作了欠阻尼、过阻尼约瑟夫森结以及具有Washer型输入线圈的单SQUID放大器, 通过在He³制冷机3 K温区下对器件电流-电压特性进行测量, 得到良好的结I-V特性曲线、SQUID调制特性, 初步实现利用SQUID进行放大作用, 并计算了SQUID的电流分辨率. 此项工作对于超导转变边沿传感器读出电路的实现具有重要的意义.     

EMI shielding and dynamic mechanical analysis of graphene oxide-carbon nanotube-acrylonitrile butadiene styrene hybrid composites

Carbon nanomaterials such as carbon nanotubes (CNTs), graphene and their hybrid have been studied extensively. Despite having excellent properties of CNTs and graphene have not yet been fully realized in the polymer composites. During fabrication agglomeration of CNTs and restacking of graphene is a serious concern that results in the degradation of properties of nanomaterials into the final composites. To improve the dispersion of CNTs and restacking graphene, in the present research work, we focused on the hybridization of graphene oxide and CNTs. Multiwalled carbon nanotubes (MWCNTs), functionalized carbon nanotubes (FCNTs), and graphene oxide-carbon nanotubes (GCNTs) reinforced acrylonitrile butadiene styrene (ABS) composites were prepared separately by vacuum filtration followed by hot compression molding. Further, dynamic mechanical analysis (DMA), and electromagnetic interference (EMI) shielding properties of ABS composites reinforced carbon nanofillers were investigated. The dynamic mechanical properties of polymers strongly depend on the adhesion of fillers and polymer, entanglement density of polymer chains in the presence of carbon fillers. The dynamic mechanical characteristics such as storage, loss modulus, and damping factor of prepared composites were significantly affected by the incorporation of MWCNTs, FCNTs, and GCNTs. Maximum EMI shielding effectiveness of −49.6 dB was achieved for GCNT-ABS composites which were highest compared to MWCNTs-ABS composites (−38.6 dB) and FCNTs-ABS composites (−36.7 dB) in the Ku band (12.4–18 GHz). These results depict the great potential of GCNTs-ABS composites to be used in various applications of efficient heat dissipative EMI shielding materials for electronic devices.     

Tunneling of Boseben-Einstein condensate and interference effect in a harmonic trap with a Gaussian energy barrier

The tunneling effect of Bose-Einstein condensate (BEC) in a harmonic trap with a Gaussian energy barrier is studied in this paper. The initial condensate evolves into two separate moving condensates after the tunneling time under certain conditions. The interference pattern between the two moving condensates is given as a comparison and as a further demonstration of the existence of the global phase.     

The absorption spectrum of water between 13 540 and 14 070 cm: ICLAS detection of weak lines and a complete line list

The absorption spectrum of water vapor has been investigated by Intracavity Laser Absorption Spectroscopy (ICLAS) between 13 540 and 14 070 cm⁻¹. This spectrum is dominated by relatively strong transitions of the 4δ polyad of vibrational states. The achieved sensitivity - on the order of α_min ∼ 10⁻⁹ cm⁻¹ - has allowed one to newly measure 222 very weak transitions with intensities down to 5 × 10⁻²⁸ cm/molecule at 296 K. Fifty new or corrected H₂¹⁶O energy levels belonging to a total of 13 vibrational states could be determined from the rovibrational analysis based on variational calculations by Schwenke and Partridge. The previous investigations in the region by Fourier Transform Spectroscopy were critically evaluated and used to construct the best to date set of energy levels accessed by transitions in the considered region. All the rovibrational transitions reaching these upper energy levels and having intensities larger than 4.0 × 10⁻²⁸ cm/mol were calculated. In the resulting line list, the positions at the level of experimental accuracy were augmented with variational intensities leading to the most complete line list for water in normal isotopic abundance in the 13 500-14 100 cm⁻¹ region.     

Fourier transform microwave spectroscopy of LiCCH, NaCCH, and KCCH: Quadrupole hyperfine interactions in alkali monoacetylides

The alkali metal monoacetylides LiCCH, NaCCH, and KCCH and their deuterium isotopologues have been investigated using Fourier transform microwave (FTMW) spectroscopy in the frequency range 5-37 GHz. The molecules were synthesized in a supersonic expansion by the reaction of metal vapor, produced by laser ablation, with acetylene or DCCD. Use of target rods of the pure metal and a DC discharge immediately following the laser interaction region were significant factors in molecule production. Multiple rotational transitions were recorded for all species, except where only the J = 1 → 0 line was accessible (Li species). Quadrupole hyperfine interactions arising from the metal nuclei were resolved in each molecule, as well as those from the deuterium nucleus in the deuterated isotopologues. From a combined analysis with previous millimeter-wave data, refined rotational constants were determined for these species, as well as ⁷Li, ²³Na, ³⁹K, and D eQq parameters. The values of the metal quadrupole coupling constants are comparable to those of the alkali halides and hydroxides, indicating a similar degree of ionic character in the metal-ligand bond.     

Laser produced melt pool: Influence of laser intensity parameter on flow field in melt pool

The flow field developed in the laser produced melt pool is investigated and the influence of the Marangoni effect on temperature field is examined. The experiment is carried out to trace the solidified melt pool geometry and the heating is simulated in line with the experimental conditions to predict the melt size in the irradiated region. In the simulations, the control volume approach is used incorporating the Marangoni effect. The enthalpy-porosity method is adopted to account for the phase change in the irradiated region. The study is extended to include the influence of the laser intensity parameter (β) on temperature and the flow field in the melt pool. It is found that the melt pool geometry and the flow field in the melt pool is influenced by the laser intensity parameter. In this case, the number of circulation cell formed in the melt pool is doubled for the intensity parameter 0.4≤β≤0.6. The predictions of the melt pool geometry agree well with the experimental data.     

Laser cutting of steel and thermal stress development

In laser cutting of sheet metals, thermal stresses are developed in the region of the cutting section. Depending on the cutting conditions and substrate material properties, the thermal stress levels can attain high values. In the present study, thermal stress developed in the region of the laser cut edges is modeled and temperature as well as stress fields are predicted. Temperature predictions are validated through the experimental results. It was found that the temporal variation of the maximum temperature along y-axis follows the laser heating source. However, temporal variation of von-Mises stress deviates slightly from the temporal variation of temperature along the cutting direction. Increase in scanning speed enhances the von-Mises stress levels due to the attainment of high temperature gradients in the substrate material.     

Structural and optical properties of waveguides in YbVO4 crystals formed by 3.0 MeV Cu-ions implantation

We report on the structural and optical characterization of waveguides formed in YbVO₄ crystals by Cu²⁺-ion implantation with an energy of 3.0 MeV and doses of 3.0×10¹⁴-1.0×10¹⁵ ions/cm². The damage properties are determined by RBS/Channeling measurements with the help of simulation code RUMP. The m-line method is used to characterize the dark-mode spectroscopy in the planar waveguides. According to the reconstructed refractive index profile of the waveguide cross section, a numerical simulation is carried out to investigate the confinement of the light in the waveguides based on the beam propagation method.